| MDR-60 60W rail type switching power supply | |||||
| Project | Tehnical index | ||||
| Output | DC voltage | 5V | 12V | 24V | 48V |
| Rated current | 10A | 5A | 2.5A | 1.25A | |
| Rated power | 50W | 60W | 60W | 60W | |
| Ripple and noise ① | ＜80mV | ＜120mV | ＜150mV | ＜200mV | |
| Voltage accuracy | ±2% | ±1% | ±1% | ±1% | |
| Output voltage regulation range |
±10% | ||||
| Load adjustment rate | ±1.5% | ±1% | ±1% | ±1% | |
| Linear adjustment rate | ±1% | ||||
| Input | Voltage range | 85-264VAC 47Hz～63Hz (120VDC～370VDC) | |||
| Efficiency(typical) ② | ＞78% | ＞86% | ＞88% | ＞87% | |
| Working current | ＜1.8A 110VAC ＜1A 220VAC | ||||
| Impulse current | 110VAC 35A， 220VAC 70A | ||||
| Start，rise hold time | 500ms、30ms、25ms ：110VAC 500ms、30ms、120ms ：220VAC | ||||
| Protect | Overload protection | 105%-150% type：protection mode：automatic recovery after belching mode abnormal conditions are removed |
|||
| Overload protection | When the output voltage is more than 135%，close the abnormanl output condition and restart it for recovery |
||||
| Environ mental science | Working current | -20℃～+70℃；20%～90RH | |||
| Storage temperature and humidity | -40℃～+85℃；10%～95RH | ||||
| Safety regulations | Withstand voltage | Input output:3KVAC input ground：1.5KVAC outpu ground ：0.5KVAC for 1 minute | |||
| Isolation resistance | Input output，input shell，output shell ：500VDC/100MΩ | ||||
| Sther | Size | 40*90*100mm | |||
| Net weight/gross weight | 330/350g | ||||
| Remark | ①Ripple and noise measurement method: use a 12″ twisted pair cable, and the terminals should be connected in parallel with 0.1uF and 47uF capacitors, and measure at a bandwidth of 20MHz. ②The efficiency is at an input voltage of 230VAC, rated load, and an ambient temperature of 25°C Under test. Accuracy: including setting error, linear adjustment rate and load adjustment rate. Linear adjustment rate test method: from low voltage to high voltage under rated load test load adjustment rate test method: from 0%-100% rated load. The start-up time is measured in the cold start state. Rapid and frequent switching of the machine may increase the start-up time. When the operating altitude is higher than 2000 meters, the operating environment temperature needs to be lowered by 5°C/1000 meters. |
||||
All Products, Din Rail
Plastic Case Din Rail MDR-60W power supply
Peculiarity:
· International universal voltage input range: 85-264VAC/120-370VDC
· Protection type: short circuit/over power
· Natural air cooling
· Up to 90% work efficiency
· DC OK relay detection function
· Standby power consumption as low as 0.3W
· 100% full load burn-in test
· 2-year warranty
Reviews
There are no reviews yet.