| DR-120 120W Din Rail Power Supply | ||||
| Project | Technical index | |||
| Output | DC voltage | 12V | 24V | |
| Rated current | 10A | 5A | ||
| Rated power | 120W | 120W | ||
| Ripple and noise ① | ＜120mV | ＜150mV | ||
| Voltage accuracy | ±2% | ±1% | ||
| Ripple and noise | ±10% | |||
| Load adjustment rate | ±1% | |||
| Linear adjustment rate | ±0.5% | |||
| Input | Voltage range / frequency | 85-264VAC 47Hz～63Hz (120VDC～370VDC) | ||
| Efficiency (typical) ② | ＞86% | ＞88% | ||
| Working current | ＜2.6A 110VAC ＜1.6A 220VAC | |||
| Impulse current | 110VAC 20A， 220VAC 40A | |||
| Leakage current | 500ms、70ms、32ms ：110VAC/500ms、70ms、36ms ：220VAC | |||
| Protect | overload protection | 105%-150% Type:production mode:burp modde automatic recovery after the abnormal condition is lifted | ||
| Overvoltage protection | Output Voltage＞135% will be restored automatically after it is removed | |||
| Short circuit protection | VO The output abnormal condition will be restored automatically after it is removed after the power is restarted | |||
| Environmental Science | Working temperature and humidity | -10℃～+50℃；20%～90RH | ||
| Storage temperature and humidity | -20℃～+85℃；10%～95RH | |||
| Safety regulations | Withstand voltage | I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P:0.5KVAC | ||
| leakage current | ＜1mA/240VAC | |||
| Insulation impedance | I/P-O/P， O/P-Shell， O/P-Shell ：500VDC/100MΩ | |||
| Other | size | 65.5*125.2*100mm | ||
| Net weight / gross weight | 790/815g | |||
All Products, Din Rail
Din Rail DR-120W power supply Plastic appearance
Features :
·Universal AC input Full range
·Protections: Short circuit / Overload / Over voltage”Cooling by free air convection
·Can be installed on DlN rail TS-35/7.5 or 15lsolation classll
·LED indicator for power on
·No load power consumption<0.5W
·100% full load burn-in test
·3 years warranty
Reviews
There are no reviews yet.